Services
Floor Coating Services in Temple, TX
Garage floors, commercial and industrial floors, decorative finishes, and the concrete prep and repair that make them last.
- Locally Owned and Operated
- Insured, Certificate on Request
- Free On-Site Estimates
One crew, every step of the floor
A coated floor is a system, not a single product. The grinding, repair, primer, base coat, broadcast, and topcoat all have to work together, and a shortcut at any step shows up later as peeling, yellowing, or worn traffic lanes. We handle the whole job, from removing what is there to the final topcoat, so nothing falls between trades.
Below is an overview of what we install. Each service has its own page with more detail on systems, finishes, and what to expect.
Garage Floor Coating
Our most requested service. A diamond-ground slab, epoxy base, full flake broadcast, and polyaspartic topcoat built to handle hot tires, road grime, and summer heat.
Garage floors → 02Commercial & Industrial Flooring
High-build epoxy, urethane cement, and anti-slip systems for warehouses, manufacturing, auto bays, clinics, retail, and food service.
Commercial floors → 03Epoxy Flooring
Self-leveling and roll-applied epoxy for interior concrete where you want a seamless, bright, easy-to-clean surface.
Epoxy flooring → 04Concrete Floor Coating
Polyaspartic and polyurea coatings, sealers, and other options for porches, patios, shops, and barns.
Concrete coatings → 05Metallic Epoxy
Decorative pearlescent pigments worked into the epoxy by hand for a glossy, fluid, one-of-a-kind floor.
Metallic epoxy → 06Flake Epoxy
Vinyl color chips broadcast into the base coat for texture, grip, and a finish that hides everyday dust and wear.
Flake epoxy →Compare Systems
Common systems at a glance
A quick comparison of the systems we install most. Your proposal will name the exact products for your floor.
| System | Best for | Look | Good to know |
|---|---|---|---|
| Flake + polyaspartic topcoat | Garages, shops, laundry rooms | Textured, multi-color | Hides dust, adds grip, UV-stable topcoat |
| High-build solid epoxy | Warehouses, workshops, storage | Solid color, glossy | Bright and easy to stripe; can yellow in direct sun without a UV topcoat |
| Metallic epoxy | Showrooms, offices, interiors | Glossy, fluid, marbled | Every floor is unique; shows scratches more than flake |
| Urethane cement | Commercial kitchens, food and beverage | Matte to satin, solid | Handles hot washdowns and thermal shock |
| Polyaspartic or polyurea | Porches, patios, sunny garages | Clear or tinted, flake optional | UV-stable and fast-curing |
Additional Services
Prep, repair, and upkeep
These are part of most coating projects, and we also take them on as stand-alone work.
- Concrete grinding and surface prep. Diamond grinding to open the surface and remove laitance, sealers, and residue.
- Crack, spall, and pit repair. Filled with repair material and ground flush so the coating sits flat.
- Moisture testing and mitigation. Testing before we recommend a system, and moisture-mitigating primers where readings call for them.
- Old coating removal. Failed epoxy, paint, and adhesives ground off down to sound concrete.
- Recoating and maintenance. A fresh topcoat on a well-bonded floor that has dulled or worn in traffic lanes.
- Floor repair. Patching damaged areas of an existing coating where a full redo is not needed.

Free On-Site Estimate
Not sure which service you need?
That is what the estimate is for. Tell us a little about the space and we will come out, look at the concrete, and recommend a system. There is no cost and no obligation.
You can also call us at (254) 500-2099.
Get a Free Estimate
Tell us about your floor and we'll set up a time to measure and talk through options.
Common Questions
Which coating system is right for my floor?
That comes down to how the space is used, how much sun it gets, what spills on it, and the look you want. A garage that sees hot tires and open doors usually gets a flake system with a polyaspartic topcoat. A commercial kitchen may need urethane cement. We recommend a system after seeing the floor.
Do you remove old coatings or paint?
Yes. Peeling paint, failed epoxy, sealers, and adhesive residue are ground off before the new system goes down. Removal adds time and cost, so we include it as its own line in your proposal.
Do you repair concrete before coating?
Yes. Crack filling, spall and pit repair, and grinding high spots are part of preparing the floor. Larger structural issues, like a slab that has heaved badly, are a job for a concrete contractor, and we will tell you if we see one.
Can I recoat an existing epoxy floor?
Often, yes. If the existing coating is still well bonded, it can be sanded or ground and recoated with a fresh topcoat. If it is peeling, it needs to come off first.
Ready to talk about your floor?
Call or send a few details, and we'll set up a free on-site estimate.